For all you die hard analog purists, Vestax has a new belt drive turntable with a very nice retro styling, it has USB and line outputs and yes it has it's own headphone output as well. Check out the specs and the photos and visit the Vestax site: http://www.vestax.jp/products/guber/cm02.html The Guber turntable is not just an isolated product, it has a matching amplifier and a pair of speakers under the "Guber" name:
More about the "Guber" System turntable:
More about the "Guber" System turntable:
| SPECIFICATIONS | |||
| TURNTABLE | Motor | DC Servo motor | |
| Drive system | Belt drive | ||
| Speed | 33 1/3rpm,45rpm,78rpm | ||
| Pitch control | +10%/-10% | ||
| Wow & Flutter | 0.13% | ||
| S/N | 60dB(ICE-B),70dB(DIN-B) | ||
| TONE ARM | Type | Static balance system | |
| Effective length | 230mm +-1mm | ||
| Offset angle | 23 | ||
| Over hang | 15mm | ||
| Tracking error | 2.35~ 1.3 | ||
| Stylus pressure | Adjustment range 0～7.0g | ||
| Headphones | 100mW+100mW max (at 32ohms load) | ||
| CARTRIDGE | Model name | VR-3S(Dual magnet) | |
| Frequency response | 15～20,000Hz | ||
| Sensitivity | 3mV | ||
| Channel balance | 2dB | ||
| Channel separation | 20dB | ||
| Stylus pressure | 2.5~3.5g | ||
| Tracking angle | 23 | ||
| Stylus for exchange | VR-3SS | ||
| Weight | 7.0g | ||
| OTHERS | Dimensions | 280(W)x138(H)x280(D)mm | |
| Weight | 4.7kg | ||
| Power | AC 100V 50/60Hz | ||
| Power requirements | 10VA | ||
No comments:
Post a Comment